Public viewer
PIT Antenna Field Visualizer (beta)
This tool allows researchers to visualize detection strength of a PIT tag antenna based on tag orientation and activation level. This is a simple tool to help you understand what a PIT tag antenna field "looks" like. Additional scans will be added to this tool as time allows. Please keep in mind this tool is in beta. The current scans were taken in an uncontrolled environment, and some field reflections from nearby ferrous material are present.
How to read it
What the map shows
The antenna
The copper rectangle is the bench antenna, a 300 × 80 mm loop lying flat. Distances are in millimeters from its center, and height is measured straight up from it.
The tag
The tag drawn above the antenna shows how the tag was held for that scan, shown four times its real size. Orientation changes the read field a lot, so each scan is a single fixed orientation.
Signal strength
Color is the reader's signal strength for the tag in millivolts, from the weakest read to the strongest.
Read volume and edges
The pale blue shell is the boundary between where the tag was read and where it wasn't. Edge lines mark where reads stopped on slower passes across the field.
Measured and estimated
Most cells were measured directly, and a few were estimated from the layers above and below. Some scans cover the whole antenna. Others are partial scans of one part of it, which "Whole antenna" mirrors across the antenna's center lines to fill in the rest. Mirroring assumes the field is symmetrical, which may or may not be accurate, so mirrored cells are marked as estimated and can be hidden.
Slicing
Each Slice bar has a start and an end handle. Pull them in to cut away the field on that axis and look inside it. Bring both handles together for a single thin slice. The dashed green box marks what is kept.
Views
Cloud shows the field as a soft volume, Voxels as solid cells, and Points as one dot per cell, colored and sized by signal strength. Cells with no read show as small faint dots.